Dimethylbenzylamine CAS103-83-3 N-dimthylbenzylamine BDMA

qiguangchem

New Member
4 Marzo 2023
4
0
1
28
Dimethylbenzylamine CAS103-83-3 N-dimthylbenzylamine BDMA​

PU Catalyst: BDMA (benzyldimethylamine) CAS:103-83-3

Over view:

Common Name: Benzyl Dimethyl Amine

Other Chemical Names: N,N-Dimethylbenzylamine, Benzenemethamine, N,N-dimethyl-;Benzenemethanamine,N,N-dimethyl-;Benzylamine,



Physical and chemical properties:

Appearance​
Form: transprant light yellow liquid​
Odour​
no data available​
PH​
10 at 10 g/l at 20 °C​
Melting point/freezing point​
Melting point/range: -75 °C – lit.​
Initial boiling point and boiling range​
181 – 184 °C at 1.020 hPa – lit.​
Flash point​
53 °C – closed cup​
Evaporation rate​
no data available​
Flammability (solid, gas)​
Upper explosion limit: 6,3 %(V)​
Upper/lower flammability
or explosive limits​
Lower explosion limit: 0,9 %(V)​
Relative density​
0,9 g/cm3 at 25 °C​
Water solubility​
soluble​
Partition coefficient: noctanol/water​
log Pow: 1,87​
Molar formular​
C9H13N​
Molar mass​
135.21​


Section 1: Chemical Product and Company Identification​

Product Name:
BDMA

Catalog Codes: Not available.

CAS#: 103-83-3

RTECS: Not available.

TSCA: Not available.

Chemical Formula: C9H13N​

Contact Information:
Shanghai Qiguang Industry and Trade co., LTD

Floor 5, qigang building, 581 yanchang middle road,
District, Shanghai, China.
Sales: +86-21-56777378
International Sales: +86-21-56777378
Order Online: www.siliconeoil.com.cn

CHEMTREC (24HR Emergency Telephone), call:

+86-21-56777378

International CHEMTREC, call: +86-21-56777378
​


Features and uses:

A liquid tertiary amine catalyst. Can improve foam cure and demolding time. It is an excellent candidate to consider for use in water-NCO reaction in rigid polyurethane foams.

BDMA is typically suitable to replace DMCHA in formulations using a high level of water as blowing or co-blowing agent can reduce surface friability and improve adhesion of foam to substrates.

BDMA promotes the urethane reaction and is commonly used in high-water rigid foam applications to reduce friability. It has a characteristic but low amine odor, and is soluble in water and in most organic solvents.

BDMA is used in flexible slabstock and rigid foam applications.

It promotes the urethane reaction and is commonly used in high-water rigid foam applications to reduce friability.

BDMA is also used for flexible slabstock foam applications.

Storage Information

Recommends that our catalysts be stored in a dry and cool area under appropriate ventilation conditions. Each container should be closed tightly to avoid contamination with moisture or other negative influences that could change the products’ performance in the end use.



Package:

180KG/Steel Drum



Typical Properties

Water, wt-% 1.0

Colour, Pt-Co Light yellow

Flash Point, ℃ 54

Density, g/ml; 20/20,℃ 0.90

Freezing Point, ℃ -75

Boiling Point, 760mmHg, ℃ 183-184



Storage Information

Recommends that our catalysts be stored in a dry and cool area under appropriate ventilation conditions. Each container should be closed tightly to avoid contamination with moisture or other negative influences that could change the products' performance in the end use. The optimum storage temperature is between 10 °C and 30 °C. Lower and higher storage temperatures are not preferable and should be avoided.



BDMA

Description

BDMA promotes the urethane reaction and is commonly used in high-water rigid foam applications to reduce friability. It has a characteristic but low amine odor, and is

soluble in water and in most organic solvents. .

Applications

BDMA is used in flexible slabstock and rigid foam applications.

Shelf Life

12 months/date of manufacture.